Looking For How To Fix ?

Search For Your Product & Get Resolution For How to Fix Or Ask a Question If Fix Not Working & We Will Fix For You.

How To Fix GPS Drift: A Complete Guide

GPS Drift

What is GPS Drift?

GPS drift is a relatively common issue that can occur when using a GPS device. It occurs when the GPS receiver doesn’t have a clear view of the sky, which can happen if you’re in an urban area with tall buildings or if you’re in a valley between mountains. When this happens, the GPS receiver can lose track of its position and start to drift off course.

If you notice that your GPS device is starting to drift, there are a few things you can do to fix it. First, try moving to a different location where there’s a clear view of the sky. If that doesn’t work, you can try resetting the GPS device or recalibrating it. Finally, if all else fails, you can contact the manufacturer of your GPS device for help.

What is a GNSS Receiver?

A GNSS receiver is a GPS receiver that can also receive signals from other satellite navigation systems, such as the Russian GLONASS system or the European Galileo system. This allows the GNSS receiver to be more accurate than a GPS receiver because it can use multiple satellite systems to triangulate its position.

GNSS receivers are becoming more common as more satellite navigation systems come online. However, they can be more expensive than GPS receivers because they require more complex hardware.

How Does GPS work?

GPS, or the Global Positioning System, is a navigation system that utilizes a constellation of satellites to determine the location of a receiver on Earth. The system was developed by the U.S. Department of Defense and is now used by civilian and commercial entities all over the world.

Each GPS satellite transmits a signal that contains data about the satellite’s current position and the current time. This signal is acquired by the GPS receiver, which then uses this information to calculate its own position relative to the satellites. By triangulating its position relative to three or more satellites, the GPS receiver can determine its exact location on Earth.

GPS signals are subject to interference from factors like atmospheric conditions and terrain. This can cause the GPS receiver to lose track of its position or calculate an incorrect position. One common type of interference is called “multipath” interference, which occurs when GPS signals reflect off of objects like buildings or mountains before reaching the receiver.

There are several ways to mitigate multipath interference, including using multiple antennas, filtering out reflected signals, and using advanced software algorithms. In some cases, it may be necessary to physically relocate the GPS antenna away from potential sources of interference.

How to Fix a GPS Drift.

If your GPS device is showing signs of drift, there are a few things that you can do in order to fix the issue. First, check the batteries and make sure that they are fresh. If the batteries are low, this can cause GPS drift. Also, check to see if there are any software updates available for your device. Sometimes, a simple update can fix a drift.

If you are still experiencing GPS drift after taking these measures, then you may need to recalibrate your device. This can usually be done by following the instructions in your user manual. If you cannot find your manual, there are many online tutorials that can walk you through the process.

Once you have recalibrated your device, be sure to keep it updated and free from dust and debris. With proper care, your GPS Drift should provide accurate readings for years to come!


If you have a GPS drift system in your car that is starting to drift, there are a few things you can do to fix the problem. First, check the GPS antenna to make sure it is firmly attached and not damaged. Next, check the GPS software to see if there are any updates available. Finally, if all else fails, you can always take your car to a professional for help.