Looking For How To Fix ?

Search For Your Product & Get Resolution For How to Fix Or Ask a Question If Fix Not Working & We Will Fix For You.

How to Fix HP Printer Error Code E3 on Windows Computer?

HP Printer Error Code E3

A lot of HP users are unable to print documents because the error code E3 pops up every time they try to do so. In this article, we are going to look at what you should do if you are seeing error code HP Printer Error Code E3 in HP printers.

What does HP Printer Error Code E3?

HP Printer Error Code E3 means there is a problem with the ink carriage or print head and they may not be working. This problem is very common in printers including HP and is easy to solve.

However, they are not the only reason why you would see the error code in question. It could also be due to a temporary glitch. This glitch could be hardware or software related. We are going to talk about all these in detail in this article. So, without wasting any time, let us join in.

How Do You Fix HP Printer Error Code E3?

HP Printer Error Code E3 can be resolved by following the solutions mentioned in this article. We would recommend you to go in the mentioned order as it will save a lot of time for you. But before going for the troubleshooting guide, it is recommended to update the computer as it will automatically update the printer drivers.

Reset printer

Reset the printer to recover from printer errors or failures.

If your printer has a rechargeable battery, remove it.

When the printer is on, disconnect the power cord from the printer.

Unplug the power cord from the power source.

Wait 60 seconds.

Reconnect the power cord to the wall outlet and printer.

Fix HP Printer Error Code E3

If you are experiencing HP printer error code E3 on your Windows 11/10 computer, try the following solutions and see if they work. We would recommend you go through the troubleshooting guide in the given order.

  • Restart your devices
  • Check the carriage
  • Run Printer Troubleshooter
  • 1. Restart your devices:-

As mentioned earlier, the problem could be a temporary glitch. To fix this, we need to restart both your computer and the printer first. First, restart your system. That way, it will stop any services that might be causing the problem. If that doesn’t work, restart the printer by following the prescribed steps.

.Disconnect the Printer from the computer.
.Turn off the device.
.Unplug the printer and wait for a minute.
.Replug the printer and connect it to the system.

  1. Check the carriage:-

Often this problem is caused by the carriage. There may be some pieces left that you need to clean in the input as well as the output tray. So, what you should do is follow the prescribed steps to inspect the carriage properly.

.Unplug the Printer
.Pull the door of the carriage.
.Search and remove any bit of paper, dirt, and some other thing that is stuck there.
.Check the latch of the carriage and make sure that it is not broken and is locked into its place.
.Close the door.
.Replug the printer and turn it on.

  1. Run Printer Troubleshooter:-

If cleaning the printer carriage doesn’t work, it’s probably a software-related issue and should therefore be resolved by deploying Microsoft’s Printer Troubleshooter. To do this follow the given steps.

For Windows 11

  1. Open Settings.
  2. Go to System.
  3. Click Troubleshoot > Other troubleshooters.
  4. Go to Printer and click Run.

For Windows 10

  1. Open Settings.
  2. Go to Update & Security.
  3. Click Troubleshoot > Additional troubleshooters.
  4. Click Printer > Run the troubleshooter.

Wait for the process to complete and hopefully, the issue will be resolved.

Hope you got some help from our article.

Note:- If you want to make a website then contact us:- hexkeyinfotech.com